Takes the waste from a WC, a wash basin and a shower then pumps it through 22mm small-bore pipework, vertically up to 5 metres or horizontally up to 100 metres or a lesser combination of both.
Waste from the WC is dealt with first when the WC is flushed.
Waste water is drained by gravity from shower, bidet or wash basin to the Saniplus through inlets on either side of the unit.
Ideal for a shower room for the less able and you have the choice of both sanitaryware and location.
Saniflo Descaler: For trouble free maintenance
Specifically created for use with Saniflo products
Laboratory formulated with phosphoric acid
Concentrated solution for optimum cleaning power
Regular usage prolongs unit life and maintains efficiency
Harmless to septic tank op
SANIALARM : Suitable for new or existing Saniflo installations.
SaniAlarm is quickly fitted onto the lid of the Saniflo unit. *Not suitable for use with Sanicom, Sanicondens, Sanicompact and Sanicubic.
1- Insert the Batteries (not supplied) in the case.
2- Carefully drill a 10mm hole in the lid of the unit where indicated in the instructions.
3- Spread some silicone grease around the plunger tube and insert it through the lid
4-Fit the SaniAlarm on top of the Plunger tube.
5-Switch to the ON position.
|Electrical Supply (V)||220-240 / 50|
|Min. Gravity Fall on Horizontal Run||3|
|Motor Speed (RPM)||2800|
|Discharge Pipe Diameter (mm)||22 / 28 / 32|
|Vertical Discharge (m)||5|
|Horizontal Discharge (m)||100|
|Dimensions (Height x Width x Depth)||512 x 181 x 270|