Product details for SANISHOWER

Home Improvement Superstores
Plumbing Wholesalers

Possible connections

  • Basin
  • Shower
  • Bidet
Vertical and horizontal discharges: 4 m 40 m

Especially useful where a shower or wash basin is to be sited in a place where gravity drainage will be difficult or impossible to run
For example in a basement or on an internal wall of a property. Sanishower can be installed next to or underneath a shower tray with access for maintenance.

Saniflo Descaler: For trouble free maintenance
Specifically created for use with Saniflo products
Laboratory formulated with phosphoric acid
Concentrated solution for optimum cleaning power
Regular usage prolongs unit life and maintains efficiency
Harmless to septic tank op


SANIALARM : Suitable for new or existing Saniflo installations.
SaniAlarm is quickly fitted onto the lid of the Saniflo unit. *Not suitable for use with Sanicom, Sanicondens, Sanicompact and Sanicubic.

1- Insert the Batteries (not supplied) in the case.
2- Carefully drill a 10mm hole in the lid of the unit where indicated in the instructions.
3- Spread some silicone grease around the plunger tube and insert it through the lid
4-Fit the SaniAlarm on top of the Plunger tube.
5-Switch to the ON position.

 

Electrical Supply (V) 220-240 / 50
Min. Gravity Fall on Horizontal Run 3
Motor Speed (RPM) 2800
Discharge Pipe Diameter (mm) 22 / 32
Vertical Discharge (m) 4
Horizontal Discharge (m) 40
Dimensions (Height x Width x Depth) 296 x 165 x 145

Catalogue

2012 version

My project

Transform the setting of your house with SFA!

Complete product list