Saniwall is a built-in framesystemdesigned to accommodate all types of suspended WC (not supplied). Saniwall has a dual flush and an integral macerator pump.
For use where gravity fed plumbing is difficult or impossible to install, Saniwall enables the installation of a complete shower room. In addition to taking the waste and water froma WC there are three further entry points, one high and two low, enabling wash basin, bidet and shower to drain to the macerator which then pumps waste up to 5m vertically, 100mhorizontally or a lesser combination of both.
Saniflo Descaler: For trouble free maintenance
Specifically created for use with Saniflo products
Laboratory formulated with phosphoric acid
Concentrated solution for optimum cleaning power
Regular usage prolongs unit life and maintains efficiency
Harmless to septic tank op
SANIALARM : Suitable for new or existing Saniflo installations.
SaniAlarm is quickly fitted onto the lid of the Saniflo unit. *Not suitable for use with Sanicom, Sanicondens, Sanicompact and Sanicubic.
1- Insert the Batteries (not supplied) in the case.
2- Carefully drill a 10mm hole in the lid of the unit where indicated in the instructions.
3- Spread some silicone grease around the plunger tube and insert it through the lid
4-Fit the SaniAlarm on top of the Plunger tube.
5-Switch to the ON position.
|Horizontal Discharge (m)||100|
|Dimensions (Height x Width x Depth)||630 x 194 x 1075|
|Vertical Discharge (m)||5|
|Discharge Pipe Diameter (mm)||22 / 32|
|Motor Speed (RPM)||2800|
|Electrical Supply (V)||220-240 / 50|